HP Serviceguard Storage Management Suite for VERITAS manual

c89t0d3	auto:hpdisk	-	-	online
c89t0d4	auto:hpdisk	-	-	online
c89t0d5	auto:hpdisk	-	-	online

Output in agile naming scheme.

# vxdisk list
DEVICE	TYPE	DISK	GROUP	STATUS
disk155	auto:LVM	-	-	LVM
disk156	auto:LVM	-	-	LVM
disk224	auto:cdsdisk	-	-	online
disk225	auto:cdsdisk	-	-	online
disk226	auto:cdsdisk	-	-	online
disk227	auto:hpdisk	-	-	online
disk228	auto:hpdisk	-	-	online
disk229	auto:hpdisk	-	-	online

For information on migrating an individual device or only a subset of devices, see vxdiskadm(1M). For information on foreign devices, see Veritas Volume Manager 5.1 SP1 Administrator's Guide. For more information on foreign devices and naming schemes, see the Migration from Legacy to Agile Naming Model in VxVM 5.0.1 on HP-UX 11i v3 whitepaper. To locate these documents, go to the HP-UX Core docs page at: www.hp.com/go/hpux-core-docs. On this page, select HP-UX 11i v3.

Upgrading from VxVM 3.5 on HP-UX 11i v1 to VxVM 5.1 SP1 on HP-UX 11i v3

You must consider the following guideline prior to upgrading from VxVM 3.5 on HP-UX 11i v1 to VxVM 5.1 SP1 on HP-UX 11i v3:

•VxVM 3.5 and VxVM 5.1 SP1 both support disk group version 90.

All upgrades from HP-UX 11i v1 to HP-UX 11i v3 require an intermediate upgrade to HP-UX 11i v2.

If you upgrade to HP-UX 11i v2 May 2005, then the default VxVM version is 3.5. If you upgrade to HP-UX 11i v2 December 2005 and later, the default version is 4.1.

To Upgrade from VxVM 3.5 on HP-UX 11i v1 to VxVM 5.1 SP1 on HP-UX 11i v3

To upgrade from VxVM 3.5 on HP-UX 11i v1 to VxVM 5.1 SP1 on HP-UX 11i v3, complete the following steps:

1.Stop activity to all VxVM volumes. For example, stop any applications such as databases that access the volumes, and unmount any file systems that have been created on the volumes.

2.Upgrade from HP-UX 11i v1 to HP-UX 11i v2. This upgrade will install Base-VXVM 4.1 by default.

3.Upgrade from HP-UX 11i v2 to HP-UX 11i v3. This upgrade will install Base-VXVM 5.0 by default.

For more information on upgrading to HP-UX 11i v3, see the HP-UX 11i v3 Installation and Update Guide. To locate this document, go to the HP-UX Core docs page at: www.hp.com/ go/hpux-core-docs. On this page, select HP-UX 11i v3.

4.If patches to VxVM 5.1 SP1 on HP-UX 11i v3 are required, the patches must be applied prior to upgrading the product.

5.Install the VxVM 5.1 SP1 package.

# swinstall –x autoreboot=true -s <depot_path> Base-VxVM-51

Upon successful completion of the upgrade, VxVM 5.0 will be replaced by VxVM 5.1 SP1. Disk groups with older disk group versions (90, 120 or 140) will be accessible after the upgrade.

58 Upgrading from Previous Versions of VxVM to VxVM 5.1 SP1