●Full: The stacker is full, and you must remove the stacked paper in order to continue printing.
●Busy: The stacker is being cleaned, and you must wait for the cleaning procedure to finish.
●Upgrading firmware: The stacker firmware is being updated, and you must wait for the updating procedure to finish.
●Jam: The stacker is jammed, and you must clear the jam in order to continue printing.
●Open: The stacker door is open, and you must close it in order to continue printing.
●Detached: The stacker is detached from the printer, and you must attach it in order to continue printing.
●Disabled: The stacker is disabled, and printing will continue without using the stacker.
●Communication error: The printer cannot communicate with the stacker; the stacker may be turned off or disconnected from the printer.
●Internal error: The stacker is not working correctly for some unknown reason. An error code is displayed on the front panel; follow the instructions there.
14 Chapter 3 Printers | ENWW |
