2Installation

Requirements

Computer hardware and software

●Intel Core i3 2.4 GHz with 4 virtual cores/threads, or equivalent or better processor

●4 GB of RAM, or more

●3.5 GB of free space on hard disk, or more, plus 100 MB for each additional printer added

●Screen resolution of 1280 × 1024 pixels, or more, tuned or calibrated to sRGB for optimal Crystal Preview performance

●Ethernet network, IPv4 or IPv6, 100 Mb/s or faster

●Microsoft Windows 7 or 8 (32- or 64-bit)

Ensure that your computer is connected to the same subnet as your printers. Otherwise, ensure that computer and printers are able to communicate through the 8080, 8085, 8086, 9100 TCP, and 161 UDP ports.

How can I improve the performance of HP Designjet SmartStream?

If you feel the need of improvement, the performance of the application can be improved by exceeding the minimum specifications above: more than 4GB of RAM (which requires a 64-bit operating system), a faster processor with more cores, a faster network, and a faster hard disk drive (ideally a solid-state drive).

Supported printers

HP Designjet SmartStream currently supports the following printers:

●HP Designjet T7200 Production printer

For documentation and other support, see http://www.hp.com/go/T7200/support.

●HP Designjet T7100 printer (but not HP Designjet T7100 Monochrome)

For documentation and other support, see http://www.hp.com/go/T7100/support.

●HP Designjet T3500 Production eMFP

For documentation and other support, see http://www.hp.com/go/T3500/support.

●HP Designjet Z6200 Photo Production printer (42 in and 60 in)

For documentation and other support, see http://www.hp.com/go/Z6200/support.

●HP Designjet Z6600 Production printer

ENWW

Requirements 5