●Copies: You can print multiple copies of a job by changing the value in the Copies field.

●Collate: If you choose to print more than one copy of the job, you can choose to collate the copies; otherwise, the printer will print multiple copies of the first page, then multiple copies of the second page, and so on.

●Reverse order: You can choose to print the job in reverse order, which may be convenient if you are stacking the pages face-up as they emerge.

NOTE: You can choose in the Preferences window whether the reverse-order option is on or off by default. See Printer-specific preferences on page 15.

●Disable cutter: If the paper is cuttable and the cutter is turned on at the printer’s front panel, you can turn it off here. If the paper is not cuttable or the cutter is turned off at the front panel, you cannot turn it on from HP Designjet SmartStream.

●Restore original position: Restore the original sequence of pages in the job, as they were when you created the job.

●Restore manual position: Restore the last manual sequence of pages in the job, as they were when you last manually reordered them.

●Extract: You can extract a whole job and store it, in the same way that individual pages can be extracted. See Extract pages on page 24.

●Print job: Send the job to the printing queue.

●Remove job: Remove the job from the job preparation pane.

●Non-stop printing: The application checks the selected roll ID, roll width, and paper type for each page against the currently loaded rolls in the printer. If a roll with the correct characteristics is not loaded, a window appear asking you how to proceed. However, just before printing the page, if a roll is detected of the correct paper type but wider than specified, printing will continue.

Page options

You can right-click any selected pages to see a menu of options for those pages. The page options enable you to extract or remove the selected pages.

ENWW

Page options 23