3PAR System Reporter User’s Guide | System Reporter 2.8 |
Table |
|
Option | Purpose |
|
|
Busy Percentage | Order by the percentage of time that the VLUN is busy (i.e., has at |
| least one outstanding IO operation). |
|
|
Total Accesses | Order by total number of accesses for VV and node cache |
| performance. |
|
|
ReadHit% | Order by read hit% for VV and node cache performance. |
|
|
WriteHit% | Order by write hit% for VV and node cache performance. |
|
|
Idle | Order by Idle time for CPU performance reports. |
|
|
Intr | Order by interrupts per sec for CPU performance reports. |
|
|
Ctxt | Order by context switches per sec for CPU performance reports. |
|
|
5.3.4.7 Low Bucket
This control is only valid for Histogram Versus Time reports and specifies the lowest service time bucket that will be included in the report.
5.3.4.8 High Bucket
This control is only valid for Histogram Versus Time reports and specifies the highest service time bucket that will be included in the report.
5.3.4.9 Sum End Buckets
This control is only valid for Histogram Versus Time reports and controls whether the Low Bucket and/or High Bucket should include the counts for lower or higher buckets respectively. For example, if High Bucket is 256 ms and Sum End Buckets is High, then the counts in the 256 ms bucket will include the sum of counts for all buckets higher than 256 ms.
5.30 | Creating Custom Reports |