System Reporter 2.8 | 3PAR System Reporter User’s Guide |
Table |
|
Report Type | Purpose |
|
|
Histogram | Display service time histogram versus time, with a separate data |
Versus Time | series for each service time bucket between the Low Bucket (see |
| 5.3.4.7 Low Bucket on page 5.30) and the High Bucket (see |
| |
| The beginning of the time range is specified by the Begin/At |
| Time control (see Begin/At Time on page 5.31) and the end of |
| the time range is specified by the End Time control (see on |
| |
| |
|
|
Histogram At | Display histogram of metrics at the time specified by the Begin/ |
Time | At Time control (see Begin/At Time on page 5.31). This control is |
| only available for PD, LD, Port and VLUN performance reports. |
| |
| |
|
|
For each report type, controls in the report menu that do not apply to that report type are disabled.
NOTE: See 9.4 Adaptive Optimization Reports for complete details on Adaptive Optimization reports.
Creating Custom Reports | 5.19 |