3PAR System Reporter User’s Guide | System Reporter 2.8 |
9Click Submit Query.
NOTE: Since performance data for LDs can increase the database size substantially you should check the Skip LD Performance data box unless you intend to configure Adaptive Optimization for the system.
You can change the value of the Use SSL and Skip LD Performance data parameters or even disable sampling for a storage server entirely as described in section 7.3.4
10Repeat step 5 to add additional storage servers and then click Return to Policies.
NOTE: The maximum CPG size supported when region data sampling is enabled for Adaptive Optimization is 250 TiB. The maximum Adaptive Optimization configuration size is limited to 125 TiB.
3.9.1.1 Setting File Permissions (Optional)
Set file permissions as desired for the password and configuration files created during installation. See 7.7 About File Permissions on page 7.22 for additional information.
3.9.1.2 Verifying Installation
Perform the following steps to verify that the System Reporter tools were installed correctly and that systems are being sampled successfully:
1Wait several minutes after adding the last storage server as described in step 5 on page 3.31 (for SQLite configurations).
2Look at the sampleloop.log file. On WIndows this is in the log subdirectory in the directory where System Reporter is installed (C:\Program Files\3par\System Reporter\log\sampleloop.log). On Linux, open /var/log/sampleloop.log.
3At the bottom of the log file, for each system to be sampled, look for an entry similar to the following:
3.32 | Installing or Upgrading the System Reporter Tools |