3PAR System Reporter User’s Guide

System Reporter 2.8

8.8.12.1 example:

The following example shows the entire query string for a ld_svt_histvstime report:

http://localhost/cgi-bin/3par-rpts/

inserv_perf.exe?charttab=chart&charttype=stackedbars&category=daily&begintsecs=& selsys=--All%20Systems--&selld=--All%20LDs--&histbegin=1&report=ld_svt_histvstime

8.8.13 vlun_perf_time

Returns a chart and/or table of performance metrics (IOPs, bandwidth, service time, I/O size) for VLUNs versus time, limited by any options selecting systems, hosts, VVs, or ports. With no

comparison type the metrics are an aggregate of the selected objects. With a comparison type of System, Host, VV, or n:s:p data is returned for each selected System, host, virtual volume,

or port respectively, being aggregated over the other object types (e.g., aggregated over selected hosts, VVs, and ports when compare=System).

8.8.13.1 example:

The following example shows the entire query string for a vlun_perf_time report:

http://localhost/cgi-bin/3par-rpts/

inserv_perf.exe?charttab=chart&charttype=stackedbars&category=daily&begintsecs=& endtsecs=&timeform=absolute&selsys=--All%20Systems--&selhost=--All%20Hosts--& selvv=--All%20VVs--&selnsp=--All%20Ports--&report=vlun_perf_time

8.8.14 vlun_perf_group

Plots the aggregate standard performance metrics (IOPs, bandwidth, service time, I/O size) of

all the VLUNs (exports) in the selected systems at a specific time, grouped by any combination of parameters (for example: System, PDID, n:s:p, etc.).

8.8.14.1 example:

The following example shows the entire query string for a vlun_perf_group report:

http://localhost/cgi-bin/3par-rpts/

inserv_perf.exe?charttab=chart&charttype=stackedbars&category=daily&begintsecs=& selsys=--All%20Systems--&selhost=--All%20Hosts--&selvv=--All%20VVs--& selnsp=--All%20Ports--&groupby=System&orderby=System&report=vlun_perf_group

8.8.15 vlun_svt_hist

8.52

Performance Reports