3PAR System Reporter User’s Guide

System Reporter 2.8

8.4.6.2 example:

The following example specifies that query results are to be displayed in the form of one or more charts:

&charttab=chart

8.4.7 charttype

Use the charttype option in conjunction with charttab=chart or charttab=both to specify the chart type to be used when results are to be displayed in chart form. This option can only be specified once in a given query string.

NOTE: Since the total height of the stacked charts (stackedbars/stackedarea) is the sum of the individual segments, they are not suitable for some forms of data. For example, in performance charts, the average service time for I/O is not the sum of the average service time for reads plus the average service time for writes. Similarly, the average size for I/O is not the sum of the average I/O size of reads plus the average I/O size of writes. Therefore, when you select stacked

charts, only the total service times and total I/O sizes are shown. If you want to see the service times and I/O sizes for reads and writes separately, use bars or lines.

8.4.7.1 values:

Specify one of the following:

stackedbars

Specifies that charts will use stacked bars. Stacked charts stack data on top of each other so you can see the total as well. See Figure 5-12 on page 5.47 for an example of a chart using stacked bars.

stackedvbars

Specifies that charts will use stacked vertical bars. Stacked charts stack data on top of each other so you can see the total as well. See Figure 5-13 on page 5.47 for an example of a chart using stacked vertical bars.

stackedarea

Specifies that charts will use stacked areas instead of stacked bars. See Figure 5-14 on page 5.48 for an example of a chart using stacked areas.

8.12

Report Options