System Reporter 2.8 | 3PAR System Reporter User’s Guide |
NOTE: When you add a new InServ to be sampled, the system, its domains and the CPGs that are available may not appear until after the CPG space data has been sampled for that system.
3Choose a domain.
4Choose the CPG that is to be monitored and optimized for each tier. Up to 3 tiers may be defined.
5Enter the amount of storage space (in GiBs) to make available for the tier.
6Schedule when the optimization is to occur. You can specify the date/day of the week and hour to mitigate impact on system performance by having the optimization run at
7Enter the measurement in hours that the sampling for optimization will take place.
8Select the appropriate mode. Cost/Balanced/Performance.
9Choose whether the configuration is to be currently active (true/false). This switch allows you to turn the optimization off and on as required.
10When done, click Submit Query. An alert window appears confirming that Adaptive Optimization configuration has been added.
11Click OK to return to the Sampling Policies window.
9.3.7 Changing an Adaptive Optimization Configuration
To change an Adaptive Optimization configuration:
1From the Adaptive Optimization Configuration window, click Change next to the configuration that you want to change.
The Change Adaptive Optimization Configuration window appears.
2Make the necessary changes.
3When done, click Submit Query. An alert window appears confirming that the Adaptive Optimization has been changed.
4Click OK to return to the Sampling Policies window.
Configuring Adaptive Optimization | 9.11 |