System Reporter 2.8

3PAR System Reporter User’s Guide

--All Nodes--

 

(Default). Specifies that nodes are not to be excluded based on their names.

<node>

This value consists of a controller node number (value is an integer between 0 and 7).

8.4.33.2 example:

The following example shows two ways to specify that nodes are not to be excluded based on name:

&selnode=

OR

&selnode=--All%20Nodes--

The following example specifies that nodes 0 and 1will be included:

&selnode=0&selnode=1

8.4.34 selnsp

Use the selnsp option to select ports according to their location.

8.4.34.1 value:

Specify one or more of the following:

--All Ports--

(Default). Specifies that no ports are to be excluded based on location.

<n:s:p>

This value consists of a port position location expressed in <n:s:p> format, where <n> (0,1,2,3,4,5,6 or 7) is a node number (which depends on the number of nodes and the storage server model),

<s> (0-5 for each node) is a node PCI slot numbered consecutively from left to right, and <p> (1-4, depending on the type of adapter) represents an adapter port numbered consecutively from top to bottom.

Report Options

8.37