System Reporter 2.8

3PAR System Reporter User’s Guide

3

Installation, Configuration, Update, and Removal

This chapter describes how to install and configure as well as remove the 3PAR System Reporter components.

3.1 Before You Begin

Before installing 3PAR System Reporter components, select a system on which to run the System Reporter sampler and Web server. This system must use Windows® Server 2003, Windows® Server 2008 or Red Hat® Enterprise Linux 5.

If necessary, perform the following setup activities on the designated Windows® or Red Hat® Linux server:

(Optional). To avoid a DHCP-assigned address changing, assign a fixed IP address to the system.

Install the InForm OS Command Line Interface (CLI), version 2.3.1 or beyond.

NOTE: The CLI installer executable for the InForm OS can be found on the System

Reporter CD at: Windows\CLI\setup.exe (for Windows) or Linux/CLI/

setup.bin (for Linux)

See the InForm OS Administrator’s Guide, located on the System Reporter CD at: Document/CLI\231_CLI_Administrator_Manual.pdf, for instructions on

installing the InForm CLI.

Installation, Configuration, Update, and Removal

3.1

Page 37
Image 37
HP System Reporter Media Kit manual Installation, Configuration, Update, and Removal, Before You Begin