Settings on the Advanced Options Screen

Resolution. Select the resolution to use. See “Zooming” on page 99, and refer to the resolution and zoom range table for the available resolutions.

Widescreen (Photo mode). When set to On (default), you can use the entire screen as viewfinder. See “Zooming” on page 99, and refer to the resolution and zoom range table for the available widescreen resolutions.

Touch Focus (Photo and Contacts Picture modes). Enables or disables the Touch Focus function. Touch Focus is On by default. See “Touch Focus” on page 100 for details.

ReviewDuration. Set a time length for displaying the captured image or video on the Review screen. Select NoLimit if you do not want to impose a time limit. Select NoReview to immediately return to the live camera screen after capturing and saving.

Quality. Select the image quality level for captured photos. Choose from Basic, Normal, Fine, and Super Fine.

Capture Format (Video and MMS Video modes). Select the file format for recorded videos.

Time Stamp (Photo mode). Include the date and time on captured photos.

Storage. Select where to save photos and videos. You can either save the files to the main memory, or to a storage card if available.

Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are using the camera.

Shutter Sound. Choose whether you want the camera to make a shutter sound when you press the Virtual Camera button.

Image Properties. Adjust properties, such as Contrast, Saturation, and Sharpness.

1

2

3

4

5

6

1.Tap a property to adjust.

2.Save the settings.

3.Decrease the value.

4.Reset all properties to default.

5.Increase the value.

6.Close the Image Properties screen without applying and saving the changes.

Effect. Choose a special effect such as Grayscale or Sepia to apply to your photos or video clips.

Metering Mode. Select a metering mode to allow the camera to measure the amount of light and calculate the best-fit exposure value before capturing. Choose either Center Area to measure light using the center area of the subject, or Average to measure light using the area around the subject.

104 Section 2I. Experiencing Multimedia

Page 114
Image 114
HTC Pro2 manual Settings on the Advanced Options Screen