HTC Pro2 manual Calling a Phone Number or Contact

Calling a Phone Number or Contact

1.Press the Talk key to display the Phone screen.

2.Begin entering the first few numbers or characters by tapping the keys on the Phone keypad. As you enter numbers or letters, the Smart Dial panel will display matches found.

If you tapped a wrong number or character, tap to erase each subsequent digit or character. To erase the entire entry, tap and hold .

3.Tap to close the Phone keypad and to see if there are more matching numbers or contacts in the Smart Dial panel. To browse through the filtered list, flick through the list or slide your finger up or down the list slowly.

Smart Dial panel

4.To call a number or contact, either:

Tap the desired phone number or contact from the list.

— or —

Call a different phone number associated with the displayed contact by tapping the contact card

icon ( ) at the right side of the contact name. On the Contact Details screen, tap the number you want to call.

Tips	•	When in a call, use the Volume Up or Down button on the side of the device to adjust the phone volume.
	•	After entering the first few digits and the phone number you are dialing is not found in your contacts, a Save
		to Contacts? button will appear above the Phone keypad. Tap it to save the number to your Contacts.
	•	To save a phone number listed on the Phone screen to your Contacts, tap	.
	•	To send a text message to a contact listed on the Phone screen, tap his or her contact card icon (		) and
		then tap Send Text Message. For more information about sending text messages, see “Text Messaging
		(SMS)” on page 131.

58 Section 2D. Using Phone Features