Hypercom 1101 System Settings Screen, IN, Setup, System, System Setup, Save and Continue, Apply and Restart, Apply and Restart

Configuration Screens Configuring the IN-tact 1101

System Settings Screen

On the navigation tree, click IN-tactSetup > System Setup > System. The System Settings screen appears:

This screen is used to configure basic information about the IN-tact1101. Entries on this screen also appear on the Overview screen.

Field/Button	Description
Description	Use this field to define the device type (IN-tact1101) or its purpose,
	such as "IP gateway for POS network." The information you decide to
	include here is up to you; up to 32 characters are accepted.
Device ID	Enter a unique identifier for the device. This is a free-form
	alphanumeric value of up to 32 characters, including spaces. An entry
	is required here; you cannot leave the Device ID blank or use only a
	space as an entry.
Location	Enter the physical location or point of installation for this device, such
	as “South Phoenix Store” or “Store 632”. Up to 256 characters are
	accepted.
Contact	Enter the name of the administrator, support group, help desk, or
	other entity that can be contacted for information about this
	configuration. You might want to include a phone number or email
	address here. Up to 256 characters are accepted.

NOTE: Click Save and Continue or Apply and Restart as appropriate. Keep in mind that your changes are not written to persistent memory until you click Apply and Restart.

IN-tact1101 Software Configuration Guide 19