Hypercom 1101 Deleting an SSL Server Certificate from the IN-tact, Load SSL Client Key to IN-tact, IN, Step, Load, Step, Open, Load, Delete, Delete, Browse

File Management Functions

Deleting an SSL Server Certificate from the IN-tact1101

This function erases the selected SSL certificate file from the IN-tact1101.

To delete an SSL certificate:

1.From the File Management Functions screen, select the stored certificate from the drop-down list (near the bottom of the screen).

NOTE: The drop-down list and the Delete button are available only when certificates are present in the system.

2.Click Delete.

The certificate is physically erased from persistent memory. However, the certificate remains usable by the system until you restart or reset the device.

Load SSL Client Key to IN-tact

Use this function if you need to set up mutual authentication with a server. For mutual authentication, a reciprocal trust relationship must be established between the IN-tactand the server. The IN-tactmust provide a client certificate containing its identity. The server must store a version of the certificate containing the client's identity and public key. This allows the server to trust the client during SSL mutual authentication.

You can load a single certificate and key combination on the IN-tact. This combination will be used for all SSL sessions that require mutual authentication. If the IN-tactis required to connect to two different hosts, each requiring mutual authentication, those two hosts must be able to accept the same certificate from the IN-tact.

Mutual authentication protects only transaction data, not configuration data.

Setting up the Client Key and SSL certificate on the IN-tactis a two-step process.

Step 1 - Enter the path and name of (or use Browse to locate and select) the Client Key. Then, enter the password associated with the SSL client certificate in the SSL Client Key Password field. Click the Load button.

The certificate file is transferred to and loaded into the memory of the IN-tact. If the file cannot be read (because it is not in PEM format or because the password is invalid), an error is displayed on the web interface.

Step 2 - After loading the Client Key, the File Management screen re-displays. You should now load the SSL certificate that matches the Client Key.

1.In the Load SSL Client Certificate to IN-tactfield, click Browse to display a standard Browse dialog box.

2.Navigate to and select the SSL certificate, then click Open.

3.Click Load to upload the SSL client certificate to the IN-tact1101. A red message displays under the field if there is an error with this operation.

50 Hypercom Corporation