Dial Backup Status

Field/Button

Description

Last Modem Connect Speed

The last reported connection speed of the modem. This value is not

 

reset when you clear statistics for the IN-tact1101.

Inactivity Timer Disconnects

The number of times the modem link was disconnected due to no

 

transactions or inactivity.

 

 

Dial Attempts

Total number of dial commands attempted.

 

 

Failed Dial Attempts

Number of attempted dial commands that failed.

 

 

Failed Authentication Attempts

Number of PPP negotiations that failed due to an invalid user ID or

 

password.

 

 

Unexpected Disconnects

Number of times the link was disconnected due to an unexpected

 

condition or situation (cable being removed, power outage, etc.).

User Messages In

Number of messages received from the host processor via the dial

 

link. This does not include Ethernet or SNMP traffic.

 

 

User Messages Out

Number of messages sent to the host processor via the dial link. This

 

does not include Ethernet or SNMP traffic.

 

 

PPP IP Address

The IP address assigned to the PPP interface.

 

 

Peer IP Address

The IP address of the other end of the PPP link.

 

 

TABLE 5-1. Status Messages

Status Message

SNMP Code

Explanation

Dial Backup Feature Not Enabled

0

The feature is disabled by default. Go to the Dial

 

 

Backup Settings screen to enable this feature.

Disconnected/Modem Not Present

1

The IN-tact1101 was not able to detect a modem

 

 

attached to the serial port (port 1). Check the

 

 

modem cabling and power.

 

 

 

On Hook/Modem Present

2

The IN-tact1101 was able to detect a modem.

 

 

However, the modem is currently not in use.

Dialing/Primary

3

The modem is currently dialing the primary dial

 

 

string.

 

 

 

Dialing/Alternate

4

The modem is currently dialing the alternate dial

 

 

string.

 

 

 

Negotiating/Primary

5

The modem has successfully connected using the

 

 

primary dial string and is negotiating PPP.

Negotiating/Alternate

6

The modem has successfully connected using the

 

 

alternate dial string and is negotiating PPP.

 

 

 

Connected/Primary

7

A PPP session has been established using the

 

 

primary dial string.

 

 

 

Connected/Alternate

8

A PPP session has been established using the

 

 

alternate dial string.

Failure

9

The modem was unable to establish a PPP

 

 

connection. Please refer to the primary and

 

 

alternate Failure Codes for additional information.

 

 

 

Initializing Modem

10

The modem is being initialized.

 

 

 

64

Hypercom Corporation