Host Processor Setup - Minimal with Multiple Hosts
Figure 5. HTTP Host Settings Screen - Multiple HostsThe second host processor setup page is used to define connection mode, IP addressing, and SSL usage:
Field/Button | Description |
NII | The value is carried over from the first configuration screen |
|
|
Description | The text is carried over from the first configuration screen |
|
|
Enable SSL | Enable where encryption and authentication are required to be |
| performed by the |
|
|
Include | Use this checkbox to enable Hypercom's proprietary POS LAN |
Length Header | header if required for this host connection. This option is disabled by |
| default. The two options below allow further control of the header and |
| should be enabled or disabled according to how the host processor is |
| configured. |
|
|
Include Length Field in Length | As mentioned above, the first two bytes of the POS LAN header are a |
Calculation | length indicator. This option determines whether or not these first two |
| bytes are included as part of the length calculation. This option should |
| be set to match host processor configuration. |
|
|
83 |