Configuring the IN-tact 1101

Configuration Screens

 

 

SNMP Interface Settings Screen

On the navigation tree, click IN-tactSetup > System Setup > SNMP Interface. The SNMP Interface Settings screen appears:

SNMP management of the IN-tact1101 is optional. The device is capable of hosting two separate SNMP sessions. Use this screen to configure the IP address for each of the sessions. Trap forwarding is optional and can be used independently of SNMP management.

Field/Button

Description

Enable SNMP Agent

Use this checkbox to enable or disable the SNMP agent.

 

 

Manager Address 1

Enter the IP address of the first SNMP manager. Set the checkbox to

 

enable or disable communication with this SNMP manager.

 

 

Manager Address 2

Enter the IP address of the second SNMP manager. Set the

 

checkbox to enable or disable communication with this SNMP

 

manager.

Trap Destination 1

Enter the first IP address to which the IN-tact1101 should forward

 

trap information. Set the checkbox to enable or disable trap

 

forwarding to this address.

 

 

Trap Destination 2

Enter the second IP address to which the IN-tact1101 should forward

 

trap information. Set the checkbox to enable or disable trap

 

forwarding to this address.

 

 

Read Only Community

Enter the SNMP Read Only community string.

 

 

Read Write Community

Enter the SNMP Read Write community string.

 

 

Click Save and Continue or Apply and Restart as appropriate. Keep in mind that your changes are not written to persistent memory until you click Apply and Restart.

26

Hypercom Corporation