Dial Backup

Field/Button

Description

Dial and Route Transactions

Click Dial to immediately dial the alternate processor, establish

over Dial Link

connection, and begin routing transactions via the modem.

Disconnect Dial

Click to disconnect the modem from either the primary or alternate

 

host processor as soon as possible. If you are connected to the

 

IN-tactvia PPP (rather than the Ethernet interface) and click this

 

button, you will be disconnected.

 

Note: If Disconnect Dial is clicked while in the middle of dialing and/or

 

establishing a PPP connection, the processing of the disconnect is

 

delayed until after the dialing and PPP establishment has completed.

 

 

NOTE: Invoking the primary or alternate dial string causes web and SNMP traffic to use the modem. To maintain communication with the IN-tact1101, your web browser or SNMP manager must be configured to use the IP address of the dial port on the IN-tactdevice.

56

Hypercom Corporation