Configuring the IN-tact 1101

Configuration Screens

 

 

Permanent Mode Settings

(Used when configuring connections requiring a permanent connection mode)

On the navigation tree, click IN-tactSetup > Application Setup > Host Port. Click Edit, then select a permanent connection type. Click Edit again.

This screen provides an option for how transaction headers are handled for permanent connection types. The Hypercom POS LAN Header and TPDU are required for permanent connections. The only option is whether or not the length field should be included as part of the length calculation. Contact the host processor to obtain the correct settings for this option if unknown.

Field/Button

Description

NII

This is the NII routing code entered for this processor on the Host Port

 

Settings screen. It is provided as a reminder of which processor you

 

are currently working with.

 

 

Description

This is the description (or name) entered for this processor on the

 

Host Port Settings screen. It is provided as a reminder of which

 

processor you are currently working with.

Include Length Field in Length

The first two bytes of the POS LAN header are a length indicator. This

Calculation

option determines whether or not these first two bytes are included as

 

part of the length calculation. This option should be set to match host

 

processor configuration.

Click Back, Save and Continue or Apply and Restart as appropriate. Keep in mind that your changes are not written to persistent memory until you click Apply and Restart. Any changes made on this screen are temporarily saved when you click Edit to access the next screen. You must still use Apply and Restart in order to write the changes to persistent memory.

38

Hypercom Corporation