Ethernet Port Settings - Minimal

Ethernet Port Settings - Minimal

These settings establish the unique identity of the IN-tact1101’s Ethernet port. DHCP is enabled by default. However, you can disable DHCP and assign a static IP address if necessary.

These values must be synchronized with the IP addressing scheme of the network:

Field/Button

Description

MAC Address

Vendor-supplied hardware address and should not be changed

 

 

Static IP Address

Default address assigned to all IN-tactunits. Unless static IP

 

addresses are assigned to each IN-tact1101 on the network, this can

 

be left as default.

 

 

Static Subnet Mask

Default value and need not be changed unless static IP addresses

 

are assigned

 

 

Static Gateway Address

This field is only required if static IP addressing is in use and the

 

IN-tact1101 is not sharing the same LAN segment as its host

 

destinations. The address of the local gateway router should be

 

entered here if not on the same segment

 

 

Static DNS Server

Enabled by default. This function is required when static IP addresses

 

are not being used.

Enable DHCP

Enabled by default. This function is required when static IP addresses

 

are not being used.

 

 

IN-tact1101 Software Configuration Guide

77