Hypercom 1101 IN, Edit, Setup, Host Port, Application Setup, HTTP Connection Type, HTTP Host Settings Screen

Configuration Screens Configuring the IN-tact 1101

HTTP Host Settings Screen

(Used when configuring connections requiring HTTP protocol)

On the navigation tree, click IN-tactSetup > Application Setup > Host Port. Select HTTP Connection Type and click Edit.

The IN-tact1101 uses the addressing information entered here to route transactions to the appropriate destination. Both a primary and alternate IP address or URL can be configured for each host processing function. Contact the host processor to obtain the correct IP and port address for routing if unknown.

Field/Button	Description
NII	This is the NII routing code entered for this processor on the Host Port
	Settings screen. It is provided as a reminder of which processor you
	are currently working with.
Description	This is the description (or name) entered for this processor on the
	Host Port Settings screen. It is provided as a reminder of which
	processor you are currently working with.
Enable SSL	Use this checkbox to enable Secure Socket Layer (SSL) if the host
	requires this type of encryption.
Include Two-byte Message	Use this checkbox to enable Hypercom's proprietary POS LAN
Length Header	header if required for this host connection. This option is disabled by
	default. The two options below allow further control of the header and
	should be enabled or disabled according to how the host processor is
	configured.

IN-tact1101 Software Configuration Guide 41