Terminal Port
Terminal Port
On the navigation tree, click Status > Terminal Port. The Terminal Port Status screen appears:
This screen provides a table that allows you to quickly analyze the status of all enabled terminals and see response time measurements (RTM). From these, you can determine what your average (or normal) response time is over a period of time. No configuration is done here; all terminal configuration is done on the Terminal Port Settings screen. You can click Refresh as needed to update the status displayed on this screen.
Field/Button | Description |
Address | Terminal’s CU (or polling) address |
|
|
Description | Description assigned in the Terminal Port Settings screen |
|
|
Status | Current status of the terminal, either Active, Idle, or No Response |
|
|
Msg In | Total number of messages received by the |
| terminal |
Msg Out | Total number of messages sent from the |
|
|
RTM | Number of total transactions that were processed between zero and |
| two seconds |
|
|
RTM | Number of total transactions that were processed between two and |
| four seconds |
|
|
RTM | Number of total transactions that were processed between four and |
| six seconds |
RTM 6+ | Number of total transactions that processing took longer than six |
| seconds. |
|
|
60 | Hypercom Corporation |