SNMP Setup - Managed
The managed approach to provisioning allows the use of Simplified Network Management Protocol (SNMP) to be enabled.
•An SNMP manager station at the ISO headquarters is assigned to receive information from the IN-tactdevices by entering its IP address into the Manager Address and Trap Destination fields. Multiple SNMP managers may be utilized - one for traps, one for gets and sets, depending on network configuration, by enabling the second Manager Address and Trap Destination fields
•The community name fields are required to identify the IN-tactdevices to the SNMP manager. These values are discretionary names selected for use and synchronized with the SNMP manager.
NOTE: If the IN-tactis behind a NAT firewall, ports 80 and 443 will require port forwarding in order to access the web interface of the IN-tact1101. To use SNMP remote management, additional setup of the router may be required. SNMP port addresses 161 and 162 will need to be accessible. You may also have to configure Virtual Server Settings within the router to set up both ports 80 and 443 as TCP for the web interface, and ports 161 and 162 as UDP for SNMP access. Refer to the router documentation for more information on performing these setup items.