Host Processor Setup - Minimal with Multiple Hosts
Field/Button | Description |
Include TPDU | The TPDU is the next five bytes of the POS LAN Header and includes |
| information used for routing purposes. This option determines |
| whether or not these five bytes are included as part of the header. |
| This option should be set to match host processor configuration. |
|
|
Use STX/ETX Wrapper | Use this checkbox to enable Start of Text (STX) and End of Text |
| (ETX) wrappers if required by the host. This option is used primarily |
| for hosts that don't run Visa protocol, but want to use async framing. |
Discard ACKs | Use this checkbox to discard any ACKs sent by the terminals, rather |
| than sending them to the host. This option is used primarily for hosts |
| that don't run Visa protocol, but want to use async framing. |
|
|
Primary Host Address | Destination address of the hosting LAN server |
|
|
Primary Port | Assigned socket to which all TCP traffic will be sent |
|
|
Alternate Host Address | Optional entry that defines where to route transactions in the event |
| the primary IP/URL address is unavailable |
Alternate Port | Socket associated with the alternate IP address |
|
|
NOTE: Because this is an HTTP connection type, Connection Mode is not used for this processor.
84 | Hypercom Corporation |