Configuration Screens

Configuring the IN-tact 1101

 

 

Ethernet Port Advanced Settings Screen

On the navigation tree, click IN-tactSetup > System Setup > Ethernet Port > Advanced. The Ethernet Port Advanced Settings screen appears:

Several additional settings are available by clicking Advanced on the Ethernet Port Settings screen. These settings can be used to “fine tune” IN-tact1101 performance on your network.

Field/Button

Description

Keep Alive

Use this checkbox to enable or disable the keep alive features of the

 

IN-tact1101. This feature is enabled by default.

 

During keep alive operation, the IN-tact1101 holds an established

 

connection open for specified amount of time before automatically

 

disconnecting.

 

When enabled, the IN-tact1101 sends a keep alive message on each

 

host connection at intervals set by the keep alive timer.

 

 

Keep Alive Timer (seconds)

Enter the value (in seconds) between keep alive messages set to the

 

host. Five seconds is the minimum, 600 seconds is the maximum.

 

Thirty seconds is the default value.

TCP Window Size

Use the drop-down list to select the size of the TCP window to be

 

used. Choose a value between 2KB and 8KB. The default value is

 

2KB.

 

 

Number of Session Retransmits

Use the drop-down list to select the number of retransmissions

 

allowed during a session. The default value is 4 and should not be

 

changed.

 

 

IN-tact1101 Software Configuration Guide

21