Host Port Status Screen
Field/Button | Description |
Status | Indicates the current status of the host processor. Valid status |
| indications are |
| following table for the meaning of the most common failure codes. |
| Active — on demand connection |
| Active SSL — on demand connection with SSL |
| Connect — permanent connection |
| Connect SSL — permanent connection with SSL |
| Enabled — an idle on demand connection |
| Failed — see error codes listed below |
| Inactive — an idle permanent connection or an on demand |
| connection that isn’t configured. |
|
|
Interface | Indicates the interface (Ethernet or PPP) that can be used to reach |
| the host processor. If the host processor cannot be reached at all, |
| “Unknown” is displayed here. When the host address is specified as a |
| DNS name instead of an IP address, the initial interface appears as |
| “Unknown”. Once a transaction has been routed to that host and the |
| DNS server successfully resolves the host name, the interface type is |
| then correctly shown as “Ethernet” or “PPP”. |
|
|
Error Codes
Code | Description | Explanation |
100 | DNS error | The associated host name cannot be found by the |
|
| Domain Name Server (DNS). This is because the |
|
| DNS is not responding or it cannot find the name. |
110 | Socket creation error | Internal socket creation error. Please refer to the |
|
| Event Log for the specific failure. |
|
|
|
120 | General connection error | The session cannot be connected to the host. |
|
| Please refer to the Event Log for the specific |
|
| reason. |
121 | Connection refused | The session cannot be connected to the host |
|
| because the host refused the connection. This |
|
| generally means that the host application is not |
|
| running or is not configured to use the TCP port. |
122 | Connection timed out | The session cannot be connected to the host |
|
| because the host did not respond. This generally |
|
| means that the IP address for the host is wrong or |
|
| the network is preventing the |
|
| contacting the host. |
|
|
|
130 | General SSL error | The session failed because of an SSL error. Please |
|
| refer to the Event Log for the specific reason. |
|
|
|
131 | SSL certificate validation failed | The session failed because the SSL certificate from |
|
| the host could not be verified. |
132 | SSL timeout | The session failed because the SSL negotiation did |
|
| not complete within the required timeframe. |
62 | Hypercom Corporation |