Chapter 4: Configuring the technology pack
5.CCM environment only: Configure the Data Direct SQL Server Bridge
The Tivoli Netcool/Proviso Cisco IP Telephony Technology Pack collects data from SNMP devices and, through SQL for Call Detail Records, from each CCM database.
The technology pack UBA is responsible for retrieving CCM data, using the Data Direct SQL server bridge to do so. This bridge is part of the UBA installation. No additional software is required.
You need to set up the Data Direct SQL server bridge to get Call Detail Records from each CallManager Publisher. The complete configuration is done by editing the $DC_HOME/conf/odbc.ini file as user pvuser.
[ODBC Data Sources]
Your_Data_Source1=DataDirect 4.20 SQL Server Wire Protocol Your_Data_Source2=DataDirect 4.20 SQL Server Wire Protocol Your_Data_SourceN=DataDirect 4.20 SQL Server Wire Protocol
[Your_Data_Source1] Driver=PVmsss20.so
Description=DataDirect 4.20 SQL Server Wire Protocol Address=xx.xx.xx.xx,1433
AnsiNPW=Yes
Database=CDR
QuoteId=No
[Your_Data_Source2] Driver=PVmsss20.so
Description=DataDirect 4.20 SQL Server Wire Protocol Address=xx.xx.xx.xx,1370
AnsiNPW=Yes
Database=CDR
QuoteId=No
[Your_Data_SourceN] Driver=PVmsss20.so
Description=DataDirect 4.20 SQL Server Wire Protocol Address=xx.xx.xx.xx,1433
AnsiNPW=Yes
Database=CDR
QuoteId=No
[ODBC]
IANAAppCodePage=4
InstallDir=/opt/datachannel/
Trace=0
TraceDll=/opt/datachannel/lib/odbctrac.so
TraceFile=odbctrace.out
UseCursorLib=0
All fields above which appear in italics must be configured according to your CallManager Publisher environment, as follows:
Field | Description |
|
|
|
|
[ODBC Data | One entry per CallManager Publisher. |
Sources] |
|
| Note: |
| The data source name must match the data source name specified in the corresponding |
| URI (Uniform Resource Identifier) parameter in the dc.cfg file. Each line in this |
| section should also be associated with a subsection that configures the data source. |
|
|
IBM Tivoli Netcool/Proviso Cisco IP Telephony 2.4.0.0 Technology Pack | 49 |
