IBM SG24-4576-00 manual Change configuration, System Programs View Configuration Screen

￿				￿
		View Configuration
	Total System Memory
	Installed memory....................................32768KB(32.0MB)
	Usable Memory.......................................32584KB(31.6MB)
	Built In Features
	Installed Memory....................................32768KB(32.0MB)
	Diskette drive 0 Type...............................2.88MB 3.5†
	Math Coprocessor....................................Installed
	Num Lock		Off
	Display F1 prompt...................................Yes
	Hands-off configuration.............................Disable
	First Serial Port(A)................................SERIAL 1, IRQ4
	Second Serial Port(B)...............................SERIAL 2, IRQ3
	High Speed Parallel Port A..........................Parallel 1
	Parallel Port A DMA Arbitration Level...............Shared level 7
	Parallel Port A SCB I/O address		8100 - 8102
	Unauthorized - Access Monitor........................Enabled
	Usable system-board memory..........................ECC
	Bypass system programs on error.....................Disabled
	Processor		90MHZ Pentium
	Slot-1 IBM SCSI-2 Fast/Wide Streaming RAID Adapter/A
	Interrupt Level......................................Level E
	BIOS Base Address...................................C800-0C9FFF
	I/O address		C00-1C1F
	DMA arbitration level...............................Level 8
	Tower configuration.................................2 Towers
	Data parity exception handling support..............Enabled
	Micro Channel streaming.............................Enabled
	INT 13 Support......................................Enabled
	Slot2 - Empty
	Slot3 - Empty
	Slot4 - Empty
	Slot5 - SVGA Adapter
	ROM address		c0000h-c7FFFh
	F1=Help	F3=Exit	F8=Fwd
￿				￿

Figure 42. System Programs - View Configuration Screen

Note

You can not make changes from the View Configuration screen.

2.Change configuration

Change configuration allows you to change configuration information used by the server. Use the Home, End, Page Up, Page Down, Up and Down arrow keys to move from field to field, and F5 and F6 to scroll trough the choices. Use F10 to save the changes to non-volatile CMOS RAM.

88NetWare Integration Guide