This option allows you to change the administrator password. You must know the current
g.Remove privileged password
This option removes the administrator password. You must know the current
h.Set unauthorized-access monitor
If your system is equipped with a
If this feature is set and it then gets subsequently activated by cover tampering, on the next boot, the system will display a message and force the operator to enter the administrator password. If this password is not entered correctly, the system will not come up.
3.Set keyboard speed
This changes the speed at which characters respond when you type. There are two options:
∙ Normal keyboard
The normal keyboard speed displays the character on the screen at the rate of 10 characters per second.
∙Fast keyboard
The fast keyboard speed displays the character on the screen at the rate of 30 characters per second.
4.Set console
This changes the server console. The server console is the hardware that you use to communicate with your server. There are three options for this setting:
a.Display and keyboard
Select this option if you want to use a display and keyboard as the server console. Errors will occur when the server is turned on if the display or the keyboard is not attached.
b.Display only
Select this option if you want to use a display without a keyboard as the server console.
c.No console
Select this option if you want to use the server without a system console. If you select this option, you can remove the monitor, the keyboard, and any attached ASCII terminal and the system will still come up without the errors normally associated with a missing keyboard or missing monitor.
5.Set startup sequence