Figure 127. NetFinity RAID Service - New Hot Spare

You can see that a new disk is enclosed in a box. It is the new hot spare drive in the array configuration.

This simulation is complete.

4.8.2 Simulating without a Hot Spare Drive

To do the same test without a hot spare drive:

1.Start the RAID Administration for NetWare Utility.

2.Select Show Drive Information to review the array configuration. A screen like the one in Figure 128 will appear.

Figure 128. RAID Administration - Array Configuration

The array configuration can also be verified using the NetFinity RAID service (see Figure 129 on page 161).

160NetWare Integration Guide

Page 173
Image 173
IBM SG24-4576-00 manual Simulating without a Hot Spare Drive, NetFinity RAID Service New Hot Spare