9. Insert NetFinity Services for NetWare Diskette #2 and select OK.

After the program files have been copied onto your NetWare server, a window like the one in Figure 110 will appear.

Figure 110. Network Driver Configuration

10.Enter a name for the server in the System Name field. This name identifies the server on the network.

11.Select Novell IPX from the Network Drivers field.

Attention

If the workstation supports additional communications protocols, the names of these protocols will appear in the Network Drivers field. Do not enable any protocols other than IPX because IPX is the only supported protocol by NetFinity Services for NetWare.

12.Select the Driver Enabled check box to activate the driver on startup.

13.Enter the System Keywords.

System keywords are not necessary for NetFinity services functions, but they can be used to organize the network by allowing the NetFinity Manager to discover machines using the keywords as filters.

14.Set the Network Time-Out value.

The network time-out is the number of seconds that NetFinity will attempt to communicate with a remote system that is not responding. If NetFinity does not establish contact with the remote system within this time, it cancels the communication attempt.

If you do not change this value, the system will use the default setting which is 15 seconds.

15.Select NetFinity Options (optional).

This allows you to enable/disable NetFinity features, such as the service execution alerts option. If you enable the service execution alerts option,

Chapter 4. Novell NetWare Installation 149

Page 162
Image 162
IBM SG24-4576-00 manual Network Driver Configuration