Unpacking and Inspecting Modules

Firmly connect the base module of the IRU to the fan module using these steps:

1.Align the rear connectors of the fan module with the rear of the IRU base module and carefully slide it in until it fully joins together.

2.Align the right side joining plate screw holes with the eight holes in the two adjacent modules. See Figure 1-10 for an example.

3.Insert and tighten the eight retention screws that hold the connection plate in place.

4.Repeat the process for mounting the joining plate on the left side of the IRU.

Figure 1-10IRU Connection Plate for Desktop Systems

007-4857-002

23

Page 45
Image 45
Intel SGI Altix 450 manual 10IRU Connection Plate for Desktop Systems