
About This Guide
•Using the ESI/ops panel (operating panel) on optional mass storage bricks. See the user’s guide for your optional SGI mass storage enclosure.
Chapter Descriptions
The following topics are covered in this guide:
•Chapter 1, “System Installation” guides an installer through the steps of unpacking and positioning the system rack(s). Rack mounting guidelines and basic cabling for the IRUs is also covered.
•Chapter 2, “Operation Procedures,” provides instructions for operation of the system including powering on and powering off your system.
•Chapter 3, “System Overview,” provides environmental and technical information needed to properly set up and configure the Altix 450 series system.
•Chapter 4, “System Control,” describes the function of the L1 and L2 controllers and provides instructions for operating the controllers.
•Chapter 5, “Rack Information,” describes the rack sizes and features.
•Chapter 6, “Maintenance and Upgrade Procedures,” provides instructions for installing or removing the
•Chapter 7, “Troubleshooting and Diagnostics,” provides recommended actions if problems occur on your system.
•Appendix A, “Technical Specifications and Pinouts‚" provides physical, environmental, and power specifications for your system. Also included are the pinouts for the
•Appendix B, “Safety Information and Regulatory Specifications‚" lists all regulatory information related to use of the Altix 450 system in the United States and other countries. It also provides a list of safety instructions to follow when installing, operating, or servicing the product.
xviii |
|