JAI TS-2030EN, TS-9720EN manual VIS-CAM System Installing the J-Panel, 1 X1 and X2 VIS CAM 300/400

VIS-CAM System

3.3 Installing the J-Panel

The J-panel layout is shown in Appendix A, See “Connection requirements.” on page 43. This Appendix has a detailed description of the J-Panel function and connectors.

3.3.1X1 and X2 VIS CAM 300/400

The VIS CAM connections to the J-Panel are shown in Table 3 and Figure 20

Table 3	VIS CAM connections to the J-Panel.
X1, X2 Pin #	Wire Color	Signal	Remarks
1	White/orange in Cat5e/6 cable	Ethernet A+
2	Orange in Cat5e/6 cable	Ethernet A-
3	White/green in Cat5e/6 cable	Ethernet B+
4	Green in Cat5e/6 cable	Ethernet B-
5	White/blue in Cat5e/6 cable	Ethernet C+	not used with VIS CAM
6	Blue in Cat5e/6 cable	Ethernet C-	not used with VIS CAM
7	White/brown in Cat5e/6 cable	Ethernet D+	not used with VIS CAM
8	Brown in Cat5e/6 cable	Ethernet D-	not used with VIS CAM
9	Black wire in Red/Black pair	Gnd
10	Red wire in Red/Black pair	+24V dc
11	White wire in Brown/White pair	Vinit+	Trigger signal
12	Brown wire in Brown/White pair	Vinit-	Trigger signal
13	White wire in Red/White pair	RS485D+	Lane Controller
14	Red wire in Red/White pair	RS485D-	Lane Controller
15	White wire in Orange/White pair	RS485D+	Lane Controller
16	Orange wire in Orange/White pair	RS485D-	Lane Controller

Installing the Vehicle Imaging Subsystem 23