VIS-CAM System
5.3.8Connector specification
Connector type: | 4 pole WAGO pluggable terminal block |
Connector on board: | WAGO |
Cable part: | WAGO |
5.3.9Connector signal specifications
Description
A 5V logic inverter drives the output. The inverter is a HCMOS type 74AHC14.
Output signal specification:
Signal amplitude | 5V TTL |
Output impedance | 100 Ω |
Pulse width | 5 ms ± 1 ms |
Signal polarity | active high |
External power requirement | |
Voltage | |
Current | max 25mA |
Electrical interface on the I/O board:
Figure 51. IO board electrical interface.
Test
A push button switch S2 can be activated to generate an output pulse for test purposes. The light/flash 2 output is high as long as the switch is activated. The switch is located as shown on Figure 51:
|
|
|
54 | Appendix A: Camera Functional & Connector Description | |
