Adjusting Pattern Balance
Ifthe decorative stitch patterns, letters, numbers or manual
buttonhole stitch are uneven when you sew on a particular
fabric, adjust them with the feed balancing dial
* The machine is set with the feed balancing dial position
with the setting mark as shown.
0 Feed balancing dial
_) Standard setting mark
(_)indication line
Adjusting Distorted Stretch Stitch Patterns
If the patterns are uneven when sewing with aparticular
fabric, adjustthem by turning the feed balancing dialwith a
coin.
When patterns are too compressed, correct by turning the
dial in the direction of"+".
When patterns are too drawn out, correct by turning the
dial in the direction of"-".
Adjusting Distorted Letters or Numbers inRed or Green Mode
If the letters are uneven when sewn on a particular fabric,
select pattern 8 to test the stitch then turn the feed
balancing dial with a coin.
When the letters or numbers overlap, turn the dial to "+".
When the letters or numbers are too drawn out, turn the
dial to "-'.
®
100