Automatic Buttonhole (BH1)

(_ Stitch pattern: BH1
(_ Thread tension dia!:AUTO
(_) R:Automatic buttonhole foot
* When you select the buttonhole stitch, the screen
indicates the message: "PUUL DOWN BH LEVER"
for a few seconds.
BH LEUER

Sewing preparation

[] Attach the automatic buttonhole foot R. Make sure
the groove on the holder catches the pin on the foot,
when lowering the presser foot.
O Groove
(_ Pin
[] Pull the button holder to the back, and place the
button in iL Push it together tightly on the button°
(_ Button holder
ff the button isextremly thick, make a test buttonhole.
ff itis difficult to fit the button through the test
buttonhole, lengthen by pulling the button holder on
the foot back toincrease length.
Q Button holder
[] Pull the buttonhole lever down asfar as it will go.
(_)Buttonhole lever
[]
[]
[]
66