Kodak 1200I Power Requirements, Connectivity Requirements, KODAK 1200i WIDE-FORMATPRINTING SYSTEM

KODAK 1200i WIDE-FORMAT PRINTING SYSTEM

Power Requirements

Either 115 or 230 volt, 50/60Hz source power is required for the printer. All major power cord standards are supplied with each printer. The voltage selector switch is positioned to the 230 volt position during shipping; ensure selector switch is set to either 115 or 230 for the appropriate region. The printer typically uses 1100 watts of power during normal operation (when dryer is engaged) –a dedicated 20 amp circuit is ideal.

NOTE: The printer must be properly grounded in accordance with regional and general equipment/electrical grounding guidelines or improper print operation may result and personnel hazards may result if inadequate grounding is provided. Verify a ground line

(G)is present at power receptacle or power strip prior to installing the printer, refer to receptacle examples below.

US/Canada	UK/Singapore/	China
	Hong Kong

Connectivity Requirements

The printer can be connected directly to a computer via an Ethernet crossover cable or via a regular Ethernet cable (RJ-45) connected to a 100BaseT HUB/Switch/Router placed on the network. For DHCP (Dynamic Host Control Protocol) networks a static IP address (dedicated address for printer) must be made available; consult a network administrator to verify system setup.

Technical Training Guide 3