Kodak 1200I manual Printer Installation Quick Steps, Shipping Brackets Removal

KODAK 1200i WIDE-FORMAT PRINTING SYSTEM

Printer Installation (Quick Steps)

Step 1: Shipping Brackets Removal

-Rotate printer head box 90 degrees onto one side and remove printer from large shipping box by pulling out and away from box.

-Before removing the shipping support brackets ensure the printer is properly placed and balanced

on two or three strips of packing foam provided.

-Remove the two (2) bolts

securing the metal crossbeam between the support brackets.

-Remove upper and lower shipping support brackets (four bolts total) and install appropriate stand leg to balance the printer. Remove wing nut, retaining bolt, and 4 screws.

Step 2: Media System Installation (1 electrical connection)

-When installing the right stand leg attach electrical plug connection to printer base; ensure the plug is aligned straight and square onto the connector to prevent damage to the electrical pins. CAUTION: plug pins

are extremely fragile; ensure restraining clips are secure.

-‘Loosely’ attach the eight (8) stand leg

screws to the printer base; this will allow for proper installation of the stand’s crossbar.

CAUTION:

Avoid pushing

plug into the

platen assembly.

Technical Training Guide 9