KODAK 1200i WIDE-FORMAT PRINTING SYSTEM

3). Connect Ethernet ‘crossover’ cable between the host workstation and the printer for direct connections (or an RJ-45 Ethernet patch cable from HUB/switch to printer if indirectly connected).

4). At desktop right click on ‘My Network Places’ again and select ‘Properties’. At Local Area Connection window select ‘Disable’. Then select ‘Enable’; this will ensure the IP addressing has been refreshed (sometimes required on Win 2000/XP systems).

Technical Training Guide

19

Page 19
Image 19
Kodak 1200I manual Kodak 1200i WIDE-FORMAT Printing System