Kodak 1200I manual Configuration Double-check example only, Rip

KODAK 1200i WIDE-FORMAT PRINTING SYSTEM

8).	Configuration Double-check (example only):
	Workstation/Server:	RIP:	Printer:
	IP: 192.168.24.73	IP: 192.168.24.74	IP: 192.168.24.74
	Subnet: 255.255.255.0		Subnet: 255.255.255.0
	Gateway: 192.168.24.2	- uses Windows	Gateway: 192.168.24.2
	- Windows Driver	driver printer port
	Loaded

9). To further verify connectivity either send a test file to printer via RIP or from the EFPU (Encad File Print Utility). Launch EFPU (if previously loaded) or load EFPU (from User System CD, select Software Utilities, located EFPU utility and load). Select port previously configured (normally identified by a default IP address the first time loaded). Select the printer test file (link and open an xxxxxx.rtl file from System CD images subfolder) and select ‘PRINT’. Printer should start printing within 30 seconds if sending pre-ripped files to printer. To download printer firmware (product enhancements/bug fixes) perform same procedure with a firmware file (.rom file; may be obtained from www.encad.com); printer will sound a beep after approximately 60 seconds and reboot power automatically.

NOTE: To function, the EFPU utility may require a LPT port be available. Add a printer port and assign to a local LPT port if necessary.

Technical Training Guide 22