Click a Job file name to select it. The Job names can be sorted chronologically or alphabetically by clicking the name or date radio buttons at the bottom of the dialog box.
The scan settings of the selected Job file are displayed on the right side of the window. The Job settings vary between the 35mm and APS film formats, see the Job file list on page 82. Click the OK button to apply the Job settings.
When the Job file is loaded, a cropping frame will appear on the image. The frame is proportional to the output use speci- fied with the Job. The frame can be resized, but the propor- tions will remain the same; the input and output values are automatically adjusted to match the change to the cropping frame.
Scan settings can be set for individual images in the film holder. Once made, they will remain in effect until changed.
Click the scan button in the main window to start the final scan. If the DiMAGE Scan Dual III Utility was opened in an
On the
The procedure to cancel the scan is the same as the index scan, see the canceling the index scan section on page (p.33).
When using a USB storage device on the same bus as the scanner, save the data on the comput- er’s hard disk first before transferring it to the storage device. Saving the scanned data directly to the device may corrupt the image data.
Quitting the DiMAGE Scan Dual III Utility
To quit the DiMAGE Scan Dual III Utility, click the close button on the upper right corner of the window. If the
43
