Konica Minolta IP-011 manual System Requirements, Case of using Windows 95/98, Parallel Port

Introduction

■System Requirements

●Windows

The following are required to print from the Windows*-compliant computers to the Printer Controller.

•Computers on which Windows 95/98, WindowsNT 4.0 can run

•CD-ROM drive (necessary to install the user software)

In case of using Windows 95/98

•Microsoft Windows 95/98

•32MB RAM or more

In case of using Windows NT 4.0

•Microsoft Windows NT 4.0 and NT Service Pack 3

•32MB RAM or more

Parallel Port

The following are required to print to the Printer Controller by way of the parallel port.

•Windows-compliant computers

•Minimum RAM capacity suitable for computers (Refer to the section of each operation system described above.)

•IEEE 1284 parallel cable

One end of the cable is required to have an amphenol 36 pin male connector (connected to the Printer Controller).

viii IP-011 Printer Controller