Konica Minolta IP-011 Printer Driver Print using the following driver, Set up-Original Paper

Chapter 3 Printer Driver

Print using the following driver

Select the driver used for printing form the list shown by clicking the [▼] button beside [Details] tab- [Print using the following driver] box. When a driver is changed, settings of presently shown property are saved and the property of the newly selected driver will appear.

S

Set up-Original Paper

Select the original paper from the list shown by clicking the [▼] button beside [Setup] tab-[Paper]- [Original Paper] box.

The original paper you can select is as follows:

Paper Sizes to Be Selected (US)

A3

A4

A4R

A5R

B5

B5R

Legal (8.5x14in)

Letter (8.5x11in)

LetterR (8.5x11in)

Statement (5.5x8.5in)

Paper Sizes to Be Selected (Europe/others)

A3

A4

A4R

A5R

B4

B5

B5R

B6R

8k

16k

16kR

F4

Ledger

Legal (8.5x14in)

Letter (8.5x11in)

LetterR (8.5x11in)

Statement (5.5x8.5in)

Refer to the operating manual of the copier for paper sizes which can be used on each tray.

[**R] indicates to feed paper from a short edge. Document sizes not including “R” indicate to feed paper from a long edge.

Set up-Paper Size

When [Setup] tab-[Paper]-[Original Paper] has been changed, [Setup] tab-[Paper]-[Paper Size] is automatically set the same settings as [Original Paper].

You can select other paper sizes than that automatically set from the list shown by clicking the [▼] button beside [Paper Size].

Paper sizes which you can select is the same as those in the above-mentioned Paper-Original Paper.

Refer to the operating manual of the copier for paper sizes which can be used on each tray.

[**R] indicates to feed paper from a short edge. Document sizes not including [R] indicate to feed paper from a long edge.

IP-011 Printer Controller 3-17