Konica Minolta IP-011 manual Outline About the Printer Tools, About the Status Monitor

Chapter 1 Outline

■About the Printer Tools

●About the Printer Tools

When you install printer driver with “setup.exe” held in the CD-ROM to the computer connected to the system of Konica 7020 series and IP-011, you can select simultaneous installation of the Printer Tools. The Printer Tools is the generic name of two programs, “Status Monitor” and “Control Panel.” The Printer Tools enable you to monitor the printer status from computers and to perform printer settings. Refer to “5 Status Monitor and Control Panel” (5-1 page) for details of the Printer Tools.

●About the Status Monitor

If you set the Status Monitor to automatically start up at the time of installing the Printer Tools, when computers connected to the 7020 series + IP-011 system are started up, the Status Monitor which is a program to monitor the printer status automatically starts up. Refer to “2 Setup” (2-1 page) for installation of the printer driver. Refer to “5 Status Monitor and Control Panel ” (5-1 page) for details of the Status Monitor.

●About the Control Panel

When [Printer Setting] on the [setup] menu of the Status Monitor is selected by clicking it, the Control Panel which is a program to perform printer settings starts up. Refer to “5 Status Monitor and Control Panel” (5-1 page) for details of Control Panel.

1-8 IP-011 Printer Controller