Introduction
■About Positioning of This Manual
This manual describes how to operate the Printer Controller Konica
An optional network board
Refer to the "7020 series operating manual" and the
■About Composition of This Manual
This manual is composed of the following five chapters and Appendix:
Chapter 1: Outline
Chapter 1 describes the Printer Controller' hardware and the outline of its functions, and briefly explains how to connect the parallel ports of computers to the Printer Controller and the Printer (7020 series).
Chapter 2: Setup
Chapter 2 describes how to install the user software which is supplied in the user software CD to the
Chapter 3: Printer Driver
Chapter 3 describes the corresponding environment and various functions of the Printer Driver installed to the
Chapter 4: Operation Panel Setup
Chapter 4 describes the layout of the operation panel of the Printer (7020 series) and how to operate and set functions on the operation panel.
Chapter 5: Status Monitor/Control Panel
Chapter 5 describes the layout of the status monitor and the control panel shown on the Windows*- compliant computers and how to operate and set functions on the status monitor or the control panel.
Appendix
Appendix describes error messages and
