Konica Minolta manual Outline, IP-011 Hardware Configuration, Interface

Chapter 1 Outline

●IP-011 Hardware Configuration

Basic Configuration

Configuration of the IP-011 is as follows:

Control board

CPU: Power PC 401 GF

Program memory: FLASH ROM

System memory: 16MB SD-RAM

Memory

The IP-011 is equipped with 16 MB memory as standard and can be expanded to 80 MB at the maximum.

●I/O Interface

Parallel

Centronics (IEEE1284)/ amphenol 36 pin male connector

PCI Bus

Card Edge Type/20MHz/32bit

Ethernet (option)

100Base-T and 10Base-T

The optional KN-304 card is used to connect to the Ethernet. The KN-304 is the internal print server card which supports multiple protocols on the Ethernet. This card includes a CPU and a flash memory with an upgradable program.

The KN-304 supports the following network protocol.

•IPX/SPX (NetWare)

•LPD/LPR (TCP/IP)

•Peer to peer (TCP/IP)

Refer to the corresponding operating manual for connection to the KN-304.

1-4 IP-011 Printer Controller