Konica Minolta IP-011 manual Printer Driver Duplex printing

Chapter 3 Printer Driver

Duplex printing

By using [Setup] tab-[Duplex], you can perform settings of the Duplex printings.

You can select [1-Sided], [2-Sided Short Edge Binding], [2-Sided Long Edge Binding] or [Booklet] from the list shown by clicking the [▼] button beside the [Duplex] box.

Default of the Duplex printing is [1-Sided].

When [1-Sided] is selected, only one side of paper is printed.

[2-Sided Short Edge Binding], [2-Sided Long

Edge Binding] and [Booklet] can not be selected in the following conditions:

•When [B6R] is selected as a paper size

[Booklet] can not be selected in the following conditions as well:

•When other settings than [Letter], [Letter R], [Ledger], [A3], [A4], [A4R], [B4], [B5R] and [B5] are selected as a paper size,

•When Staple is set to other settings than [Off],

•When Front/Back Cover is set, or

•When Alternate is set to [On].

[2-Sided Short Edge Binding]

Prints paper so that the head

A

of the front becomes the foot

of the back.

A

B

[2-Sided Long Edge Binding]

Prints paper so that heads of

both sides become upward A

A B

[Booklet]

Prints paper so that booklets are made when it is folded into two.

IP-011 Printer Controller 3-11